Skip to main content

Show Assignments Builder

Split your routines across several shows so siblings and families share a performance, dancers do fewer shows, and run times and audiences stay balanced. Compare scenarios, export rosters, then send each show's routine list to the Show Order Optimizer.

Written by Joe Naftal

When your recital has more than one show, the Show Assignments Builder helps you decide which routines go in which show. It tries to keep siblings in the same show, keep each dancer in as few shows as possible, and balance run times and audience size.

Nothing changes for families until you accept your plan and then publish each show's order in the Show Order Optimizer.

Good to know: The Show Assignments Builder is part of the Production Pro plan. On other plans you can open a read-only preview of how many dancers and families your current lineups split across shows.

Open the builder

Go to Shows and click Show Assignments Builder.

The first time, the builder starts a plan (called a scenario) with your upcoming shows and the routines already in them. Your work saves automatically as you go.

Read the board

Each show is a column. The top of each column shows its run time, number of routines, dancers and families, and the estimated seats it needs. Each routine card shows its length, number of dancers, style, average age and teachers.

Across the top you'll find totals for the whole plan:

  • Multi-show dancers: dancers who perform in more than one show.

  • Extra appearances: every show a dancer has to attend beyond their first.

  • Split families: families whose dancers are spread across more than one show.

  • Run time: each show's length in minutes.

  • Demand vs capacity: seats needed (families in the show × seats per family) compared with the venue's seats.

Click the gear on a column to set that show's Target min, Max routines, Min minutes, Max minutes and Venue seats. Max and min limits are hard limits. Venue seats turns on the seating bar, which turns red when demand is too high.

Choose shows and routines

  • Click Scenarios, then tick the shows under Shows in this scenario. Try 2 shows versus 3 shows this way.

  • Click Routines to pick which routines to split. Use All, In shows (only routines already in these shows) or None, then tick or untick routines.

  • Click Add show at the end of the board to create a new show. Enter a Name, Date, Start time and Venue, then click Create show. This adds a real show to your Shows list.

Move routines between shows

Drag a routine card to another show. While you drag, each column shows what the move would do, like “+1 multi-show dancers”, “reunites 2 families” or “breaks a rule”. Green is good, amber is worse, red breaks a rule.

To have a routine perform in more than one show, click the repeat icon on its card, choose how many shows, and click Save. Each copy goes in a different show. A lock icon means a rule keeps that routine where it is.

Let the builder optimize

  1. Click Optimize. It searches for up to about 20 seconds. Click Pause to stop early.

  2. Check the Proposed assignment: multi-show dancers and split families before and after, plus each show's run time.

  3. Click Use this to apply it, Run again to keep searching, or Discard to keep your board as it was.

Set rules and goals

Click Rules to open the rules panel. Hard rules are never broken. Pick a rule type, fill in the details and click Add rule.

  • Pin to show: this routine must be in the show you choose.

  • Exclude from show: this routine can't go in the shows you choose.

  • Every show: this routine is in every show, like an opener, finale or company number.

  • Repeat routine: this routine performs in a set number of shows, each in a different show.

  • Different shows: these routines are copies of the same number (like “– Sat” and “– Sun”), so each goes in a different show.

  • Keep together: these routines always land in the same show.

  • Teacher availability: this teacher can only be at the shows you choose, so all their routines stay in those shows.

If routine names look like copies of the same number, the builder lists them under Likely repeats. Click Add to keep each copy in a different show.

Goals

Set each goal to Off, Low, Normal or High. Higher goals win when they compete.

  • Fewer multi-show dancers: keeps each dancer in as few shows as possible.

  • Keep families together: puts siblings in the same show, so each family attends fewer shows.

  • Balance run time: makes the shows about the same length, or close to each show's target.

  • Balance audience demand: spreads families out so no show runs out of seats.

  • Balance styles and ages: gives every show a good mix.

  • Youngest dancers in earliest show: puts the youngest routines in the show you pick under Show for youngest dancers.

  • Keep a teacher's routines together: keeps each teacher in fewer shows.

Below the goals, set Seats per family (used to estimate demand), Young age cutoff and Show for youngest dancers.

If rules can't all be met, a red “Rules can't all be met” box explains why.

Check the details

The tabs on the right help you find problems:

  • Multi-show: each dancer in more than one show, and which shows.

  • Families: each split family and where each dancer performs. Click Suggest a fix for one move that brings the family together.

  • Matrix: a grid of dancers and shows. Filter by family, teacher or age, or click Export matrix.

  • Rules: whether all your rules are met. Click Edit rules & goals to change them.

Compare scenarios

Click Scenarios to rename your plan and compare up to 5 versions, like “2 shows” and “3 shows”, side by side. The table shows each scenario's shows, multi-show dancers, extra appearances, split families, run times and rule problems.

  • Type a name under New scenario and click Create from current to start a copy.

  • Click Open, Duplicate or Delete next to a scenario.

  • Switch scenarios with the dropdown at the top of the builder.

Export rosters

Click Export and choose Excel or PDF. Both include show rosters, an appearance matrix, a family schedule and a teacher schedule.

Accept your plan

  1. Click Accept.

  2. Read the message and click Accept. If rule problems remain, the button says Accept anyway.

  3. In Optimize this show's order?, click Optimize order next to a show to open its Show Order Optimizer.

  4. In the optimizer, arrange the order and click Publish. Repeat for each show.

Accepting writes each show's routine list into that show's optimizer draft. Routines that stay keep their order, and new ones go at the end. When you publish a show, routines that moved in are added to it and routines that moved out are removed.

The accepted scenario shows an Accepted badge. If you change it later, you'll see “Assignments changed since last accept.” If routines were added to these shows on the show page, click Add them to bring them into the scenario.

Does accepting change my shows right away?

No. Accepting only updates each show's draft in the Show Order Optimizer. Check-in, Stage Manager, reports and families see the change once you publish each show's order.

Can I undo?

Use Undo and Redo at the top to step through your moves. Each time you accept, a copy is saved under History. Click Restore to load it into the open scenario, then accept again to send it to the shows.

Which plan do I need?

Production Pro. On other plans, the button opens a read-only preview with a link to Upgrade to Production Pro.

Does Add show create a real show?

Yes. It adds the show to your Shows list and adds it as a column in this scenario.

Why can't I drag a routine?

It has a Pin to show or Every show rule. Remove the rule in the Rules panel to move it.

How many scenarios can I keep?

Up to 5. Delete one to add another.

Did this answer your question?