Skip to main content

Show Order Optimizer

Build a show's running order with live quick-change and back-to-back checks, let the optimizer suggest a better order, set rules like locked openers and intermissions, then publish it to Stage Manager, reports and families.

Written by Joe Naftal

The Show Order Optimizer helps you build a show's running order so dancers have enough time to change costumes. It counts every back-to-back and quick change as you work, and it can search for a better order for you.

Everything you do here is a draft. Stage Manager, reports and families keep seeing the current order until you click Publish.

Good to know: The Show Order Optimizer is part of the Production Pro plan.

Open the optimizer

  1. Go to Shows and open a show.

  2. Click Show Order Optimizer above the lineup.

The optimizer opens full screen. The first time, your draft starts from the show's current lineup. After that, it opens where you left off.

Read your draft

Across the top you'll see the Run time, the length of each act under Acts, and the number of Routines. Two counters show the problems to fix:

  • Back-to-back: a dancer is in two routines in a row, with no time to change. These are the most serious.

  • Quick changes: a dancer has fewer routines between two of theirs than you allow. You set how many under Rules.

Each routine shows its number, teacher, style, ages, number of dancers, length in minutes and an estimated start time. A warning badge shows how many quick changes involve that routine.

Tip: Start times use each routine's start and end times. If a routine doesn't have them, it counts as 3 minutes. Type a different length in the minutes box to fix the timing.

Move routines by hand

Drag a routine up or down. While you drag, the gaps between routines change color so you can see what each spot would do:

  • Green: no new conflicts.

  • Amber: adds quick changes. Hover to see which dancers.

  • Red: adds a back-to-back or breaks one of your rules.

Add intermissions and pauses

  • Intermission splits the show into acts. Dancers can perform right before and right after one, because quick-change gaps start over.

  • Short pause is a short break for timing only. It isn't included when you publish.

Drag a break to where you want it, then type a new name or length. Click the trash can to remove it. The optimizer never moves breaks. It only reorders routines around them.

Let the optimizer find a better order

  1. Click Optimize. It searches for up to about 20 seconds and shows the quick changes and back-to-backs going down as it works. Click Pause to stop early.

  2. Compare your Current draft with the Proposed order. The table shows quick changes, back-to-backs, style spacing, teacher spacing and act lengths for each. Arrows show how far each routine moved.

  3. Drag routines in the proposed order if you'd like to adjust it.

  4. Click Accept proposed order to make it your draft, or Discard to keep yours. Click Run again to search some more first.

If your order is already the best one it can find, you'll see “Your current order is already the best the optimizer found”.

Set rules

Click Rules to tell the optimizer what must always happen. Rules are never broken. Pick a type under Add a rule, fill in the details and click Add rule.

  • Lock position: pins a routine to an exact number, like your opener or finale. You can also lock a break to come right after a number. The padlock on each routine does the same thing.

  • Keep in act: the routine can move, but only within its current act.

  • Position window: the routine must land In the first or In the last few numbers, Before # or After # a number, or Only in Act you choose.

  • Block: a group of routines that always stays together. Choose whether to keep their order, keep them where they are now, or keep them in their current act.

  • Same-costume pair: two routines the same dancers wear one costume for. None of their other routines can come between them, and no quick change is counted between the two.

  • Link to intermission: places a routine right before or right after a break.

  • Never adjacent: two routines can never be next to each other.

Each rule shows Satisfied or Not satisfied. If two rules can't both be met, like two routines locked to #1, a red message explains why and Optimize is turned off until you fix it. Click View rule to jump to it.

Goals

Goals are what the optimizer tries for. Set each one to Off, Low, Normal or High. Higher goals win when they compete.

  • Minimize quick changes: gives dancers as many routines as possible between theirs.

  • Style spacing: avoids two routines of the same style in a row.

  • Teacher spacing: avoids one teacher's routines in a row, so they can line up each number.

  • Youngest dancers early: puts the youngest dancers early in their act so families can leave sooner.

  • Big numbers spread out: avoids two large groups in a row, so the wings don't get crowded.

  • Act balance: keeps acts close to the same length.

Settings

  • Quick change threshold: how many routines between two of a dancer's routines still count as a quick change (0–5). 0 means only back-to-backs. 1 means one routine between.

  • Young dancer age cutoff: dancers this age or younger count as young.

  • Big number size: routines with at least this many dancers count as big numbers.

  • Act balance within: how many minutes apart your acts can be.

Good to know: Style spacing and Teacher spacing need each routine's style and teachers filled in.

Check conflicts, dancers and insights

  • Conflicts: every back-to-back and quick change, with the dancer, both routines and about how many minutes they have. Click one to highlight both routines.

  • Dancer: search a dancer to see their routines in order, the gap before each one, and their costume if you've set one.

  • Insights: style spacing, teacher spacing, big numbers next to each other, act lengths and how many young routines land early.

Undo, versions and export

  • Undo and Redo step back and forward through your changes to the order. You can also press Ctrl+Z (Cmd+Z on a Mac).

  • Versions lists every published order and every accepted optimization. Click View to see the order, or Restore to make it your draft again.

  • Export downloads your draft as a CSV file with each item's number, start time, minutes, teacher, style, number of dancers and quick changes.

Publish the order

  1. Click Publish.

  2. Read the message, then click Publish. If back-to-backs remain, the button says Publish anyway.

Stage Manager, Wardrobe Supervisor, Show Status Display, Performer Portal and reports switch to the new order, and routines are renumbered. New intermissions are added to the show's lineup. Anyone else signed in to your studio gets a “Show order changed” alert.

Does it change my lineup right away?

No. Your changes save to a draft automatically, but the show's lineup only changes when you click Publish.

Can I undo?

Yes. Use Undo while you work. To go back further, open Versions and click Restore on any published or optimized version. It becomes your draft, and nothing changes for families until you publish again.

Which plan do I need?

Production Pro. On other plans, the Show Order Optimizer button shows a lock and a link to view plans.

Can other staff see my draft?

Each show has one draft. Anyone with permission to edit shows sees the same draft when they open the optimizer for that show.

What happens if I add or remove routines on the show page?

New routines appear at the end of your draft, and removed routines drop out of it. Moving routines up or down on the show page doesn't change your draft's order.

Why can't I click Optimize or Publish?

Optimize is off when your rules can't all be met, or when the show has fewer than 2 routines. Publish is off while a proposed order is on screen. Accept or discard it first.

Did this answer your question?